Rancang Bangun Die Set sebagai Alat Bantu Press Tool untuk Proses V-Bending Stainless Steel
on
Authors:
Rusdi Nur, Muhammad Arsyad Suyuti, Muhammad Iswar
Abstract:
“Press tools, as production aids, are widely used in the manufacturing industry for metal forming, including the bending of plate materials. The press tool consists of a die set used to cut or shape a product or component from sheet metal by using a press machine as a pressing tool that can produce products with uniform quality and in a short time. The stages in the die set design process consist of several stages, namely: 1) the design stage is carried out using Autodesk Fusion 360 software, 2) the manufacturing stage is carried out using machine tools and their accessories, 3) the assembly stage of each component both made and standard become a complete stu die set, 4) the stage of testing the die set by performing a compression test on a compression testing machine (UTM Galdabini) with various test parameters. The results of the buckling test show that the bending force required for bending a stainless steel plate with a thickness of 1 mm is in the range of 92 N – 125 N, while for a thickness of 2 mm it ranges from 113 N – 163 N. The bending angle produced is 107O45’ – 115O45’ for a thickness of 1 mm, and 100O20’ – ??116O45’ for a thickness of 2 mm. The conclusion obtained is that this die set designed and made has shown performance and meets the requirements as a press tool that can bend stainless steel plates.”
Keywords
Keyword Not Available
Downloads:
Download data is not yet available.
References
- [1] M. A. Suyuti, M. Iswar, R. Nur, and E. Erniyanti, “Desain Konstruksi Press Tool Sebagai Alat Bending Bentuk V Dengan Garis Bending Max. 300mm,” J. Sinergi Jur. Tek. Mesin, 2019.
- [2] Ö. Tekaslan, N. Gerger, and U. Şeker, “Determination of spring-back of stainless steel sheet metal in ‘V’ bending dies,” Mater. Des., vol. 29, no. 5, pp. 1043–1050, 2008.
- [3] M. A. Suyuti, “Rancang Bangun Simpel Press Tool untuk Bending V Bottoming,” J. Tek. Mesin SINERGI, vol. 13, no. 2, pp. 160–173, 2019.
- [4] R. Nur and M. A. Suyuti, “Mini Press Tool as Learning Practical: Designing, Manufacturing, and Analysis,” J. Ind. Eng. Manag. Res., vol. 1, no. 2, pp. 9–14, 2020.
- [5] Autodesk, “Fusion 360.” 2019.
- [6] G. Verma, Autodesk fusion 360 black book. BPB Publications, 2018.
- [7] M. A. Suyuti, R. Nur, and M. Iswar, “Rancang Bangun Press Tool Untuk Alat Bending Pelat Tipe Die-V Air Bending,” Mach. J. Tek. Mesin, vol. 6, no. 1, pp. 39–45, 2020.
PDF:
https://jurnal.harianregional.com/jem/full-75943
Published
2022-01-11
How To Cite
NUR, Rusdi; SUYUTI, Muhammad Arsyad; ISWAR, Muhammad. Rancang Bangun Die Set sebagai Alat Bantu Press Tool untuk Proses V-Bending Stainless Steel.Jurnal Energi Dan Manufaktur, [S.l.], v. 14, n. 1, p. 20-26, jan. 2022. ISSN 2541-5328. Available at: https://jurnal.harianregional.com/jem/id-75943. Date accessed: 08 Jul. 2024. doi:https://doi.org/10.24843/JEM.2021.v14.i01.p04.
Citation Format
ABNT, APA, BibTeX, CBE, EndNote - EndNote format (Macintosh & Windows), MLA, ProCite - RIS format (Macintosh & Windows), RefWorks, Reference Manager - RIS format (Windows only), Turabian
Issue
Vol 14 No 1 (2021)
Section
Articles
Copyright
This work is licensed under a Creative Commons Attribution 4.0 International License
Discussion and feedback