Authors:

Si Putu Gede Gunawan Tista

Abstract:

“One of the ways to reduce energy consumption on the air plane and the other bluff bodies are by decreasing the drag. Dragis closely related to the flow separation. The earlier separation, then the drag will increase more. Based of the fact the effortto decrease drag is conducted by manipulating the field of fluid flow. Stream manipulation was be done by installingcylindrical obstacle in front of main cylinder. The purpose of this research is to analyze the effect of placement cylindricalobstacle at vertical position in the various horizontal distance in front of main cylinder on drag coefficient . In thisresearch, the experiment was conducted in the wind tunnel, which consisted of blower, pitot pipe, manometer, cylinder pipe,and cylinder rod. The cylindrical obstacle was positioned at vertical (y=14 mm) in the various horizontal distanceL/D = 1.41, L/D = 1.56, L/D = 1.72, L/D = 1.88, L/D = 2.03, L/D = 2.19, and L/D = 2.81 by upstream from the maincylinder. Diameter cylinder obstacle was 8 mm.. The Reynolds number based on the main cylinder diameter (D = 42 mm)was Re = 3.42 x 104. The research results showed that the cylinder rod could decrease the drag coefficient of main cylinder.Drag coefficient for cylinder without cylinder rod was 0.167 while the biggest decrease of coefficient of drag with cylindricalobstacle was happened at L/D = 1.72 which was 0,0593. It means that the drag coefficient of main cylinder with cylindricalobstacle was 64.5% lower than the cylinder alone.”

Keywords

Keyword Not Available

Downloads:

Download data is not yet available.

References

References Not Available

PDF:

https://jurnal.harianregional.com/jem/full-2336

Published

2021-11-09

How To Cite

GUNAWAN TISTA, Si Putu Gede. Pengaruh Penempatan Penghalang Berbentuk Silinder Pada Posisi Vertikal Dengan Variasi Jarak Horisontal Di Depan Silinder Utama Terhadap Koefisien Drag.Jurnal Energi Dan Manufaktur, [S.l.], nov. 2012. ISSN 2541-5328. Available at: https://jurnal.harianregional.com/jem/id-2336. Date accessed: 28 Aug. 2025.

Citation Format

ABNT, APA, BibTeX, CBE, EndNote - EndNote format (Macintosh & Windows), MLA, ProCite - RIS format (Macintosh & Windows), RefWorks, Reference Manager - RIS format (Windows only), Turabian

Issue

Vol 4, No.2 Oktober 2010

Section

Articles

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License