Authors:

Heru Sukanto

Abstract:

“The research investigates the effect of sintering temperature on density and mechanical properties of HDPE-rubbercomposite which was produced by pressured sintering methodThe materials that were used are HDPE plastic waste of oilbottle and unused tire. These materials were powdered via mechanical grinding manually. The powder size of -20 mesh wasselected as a raw material for specimen. Producing the specimens involved powder technology. Pressured sintering processwas commited for 5 minutes under pressure load of 1 MPa. The sintering temperature was variated along 110 to 140oC byincreasing 10oC incrementally. Specimen testing involved density, bending strength and izot impact strength. All of testingwas conducted on ASTM standard testing.The result reveals that increasing sintering temperature will grow up the density,bending strength and impact strength of specimen up to 10%, 12% and 72% respectively. The extreme increasing ofspecimen properties occurs at the temperature range of 120 to 130oC..”

Keywords

Keyword Not Available

Downloads:

Download data is not yet available.

References

References Not Available

PDF:

https://jurnal.harianregional.com/jem/full-2288

Published

2021-11-09

How To Cite

SUKANTO, Heru. The Influence of Sintering Temperature toward Density and Strength of Plastic-Ruber Composite.Jurnal Energi Dan Manufaktur, [S.l.], nov. 2012. ISSN 2541-5328. Available at: https://jurnal.harianregional.com/jem/id-2288. Date accessed: 28 Aug. 2025.

Citation Format

ABNT, APA, BibTeX, CBE, EndNote - EndNote format (Macintosh & Windows), MLA, ProCite - RIS format (Macintosh & Windows), RefWorks, Reference Manager - RIS format (Windows only), Turabian

Issue

Vol 3, No.1 April 2009

Section

Articles

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License