Authors:

I Wayan Sukania, Iphov Kumala Sriwana, Edwin Suryajaya

Abstract:

“Abstrak:PT. XYZ merupakan perusahaan yang bergerak dibidang textil yang memproduksi benang jahit. Perusahaan selalu berusaha meningkatkan kualitas produknya dalam penanganan produk yang cacat yang terjadi pada proses produksi karena jumlah cacat yang timbul cukup banyak. Untuk itu perlu dilakukan tindakan perbaikan dalam menurunkan tingkat cacat yang terjadi. Pada penelitian ini, penulis menggunakan metode six sigma dengan model perbaikian Define-Measure-Analyze-Improve-Control (DMAIC) dan Failure Mode and Effect Analysis (FMEA) untuk menganalisis kinerja proses dan produk yang dihasilkan. Penerapan metode tersebut diharapakan mampu meningkatkan kualitas perusahaan yang sekarang pada level sigma 3,8 menuju tingkat kinerja kualitas 6 Sigma. Kata kunci: Six Sigma, FMEAAbstract:PT. XYZ is a company engaged in textile-producing sewing thread. The company is always trying to improve the quality of products due to quite a lot of products defects occur in the production process. It is necessary for corrective action in reducing the level of defects that occur. In this research, the six sigma with Define-Measure Analyze-Improve-Control (DMAIC) and Failure Mode and Effect Analysis (FMEA) models were used to analyze the performance of processes and products. Application of those methods are expected to be able to improve the quality of company that are now at the level of sigma 3,8 to 6 sigma level of quality performance . Keywords: Six Sigma, FMEA”

Keywords

Six Sigma, FMEAAbstract:PT. XYZ is a company engaged in textile-producing sewing thread. The company is always trying to improve the quality of products due to quite a lot of products defects occur in the production process. It is necessary for corrective action in reducing the level of defects that occur. In this research, the six sigma with Define-Measure Analyze-Improve-Control (DMAIC) and Failure Mode and Effect Analysis (FMEA) models were used to analyze the performance of processes and products. Application of those methods are expected to be able to improve the quality of company that are now at the level of sigma 3, 8 to 6 sigma level of quality performance . Keywords: Six Sigma, FMEA

Downloads:

Download data is not yet available.

References

References Not Available

PDF:

https://jurnal.harianregional.com/jem/full-22783

Published

2021-11-09

How To Cite

SUKANIA, I Wayan; SRIWANA, Iphov Kumala; SURYAJAYA, Edwin. Usulan Perbaikan Kualitas Penggulungan Benang Nilon Dengan Menggunakan Metode Six Sigma di PT. XYZ.Jurnal Energi Dan Manufaktur, [S.l.], v. 8, n. 2, july 2016. ISSN 2541-5328. Available at: https://jurnal.harianregional.com/jem/id-22783. Date accessed: 28 Aug. 2025.

Citation Format

ABNT, APA, BibTeX, CBE, EndNote - EndNote format (Macintosh & Windows), MLA, ProCite - RIS format (Macintosh & Windows), RefWorks, Reference Manager - RIS format (Windows only), Turabian

Issue

Vol 8 No 2 (2015): Oktober 2015

Section

Articles

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License