Authors:

I M. Rajendra, I. A. Anom Arsani

Abstract:

“Decantation process was done to separate oil and water. Mostly, Small Medium Enterprises (SME) use lowtraditional technology as multiple drums. As a result, there is much oil dumped together with wastewater. A betterway to decant oil and water can be done by using an interceptor plate in decanter equipment. This research aims wasto test the performance of decanter with special design by using an interceptor plate. The observation focused ondistance between plates toward the oil content in wastewater, which was measured by its density. Three variables ofplate distance were 10 mm, 20 mm, and 30 mm. Material tests were nilam and clove oil with several concentrationsi.e. 1.96%, 3.85% and 5.66%, and the flow rate was adjusted at 2 liters/minute. The result shown that the interceptorplate with 10mm distance produced wastewater with lower content of oil. In addition, in industry scale test, thedecanter having 10mm distance plate interceptor could reduce oil loss up to 11.8% for nilam and 42.9% for clovecompared to that of multiple drum.”

Keywords

Keyword Not Available

Downloads:

Download data is not yet available.

References

References Not Available

PDF:

https://jurnal.harianregional.com/jchem/full-2750

Published

2021-11-09

How To Cite

RAJENDRA, I M.; ANOM ARSANI, I. A.. PROSES DEKANTASI MINYAK ATSIRI DENGAN VARIASI PLAT INTERCEPTOR DALAM DEKANTER.Jurnal Kimia (Journal of Chemistry), [S.l.], nov. 2012. ISSN 2599-2740. Available at: https://jurnal.harianregional.com/jchem/id-2750. Date accessed: 08 Jul. 2024.

Citation Format

ABNT, APA, BibTeX, CBE, EndNote - EndNote format (Macintosh & Windows), MLA, ProCite - RIS format (Macintosh & Windows), RefWorks, Reference Manager - RIS format (Windows only), Turabian

Issue

Vol. 3, No. 2 Juli 2009

Section

Articles

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License