Authors:

Made Suarda, I Gusti Bagus wijaya Kusuma, Made Sucipta, Ainul Ghurri

Abstract:

“Four shaped models of delivery valve had been investigated and compared to improve performance of a hydraulic ram. Hydraulic ram pumps have been constructed and operated. Most of them built locally using steel pipe fittings that commercially accessible in the market rather than factory-made one. These have assisted inhabitants in rural or hilly area where water sources available for water supply services or irrigations. However, the major problem challenged by the public was on designing and repairing of the impulse and delivery valves of the pumps. Performance of the pumps are affected predominantly by the both valves. One characteristic of the valves is their shape. Considered on the characteristics of the fluid flow through surface of plate and sphere object are different on the pattern and losses. Therefore, investigation is necessitated to find a proper shape of the delivery valve for enhancing the performance of the pump. In this research four valve models were experimented to assess the hydraulic ram pump performance on varies delivery heads. The results show that the sphere model of the delivery valve offered the best efficiency, then followed by the membrane, the half-sphere and the flat delivery valve models. However, the rounded model: sphere and half-sphere delivery valve model were facing obstructions in implementation for a high delivery head.”

Keywords

Keyword Not Available

Downloads:

Download data is not yet available.

References

  • [1] G.D. Jennings, Hydraulic Ram Pumps, North Carolina: North Carolina Cooperative Extension Service, 1996.
  • [2] M. Logesh, P. Sakthivel, K.L. Sibi, and R. Siva, “Renewable energy hydram – a review”, First International Conference on NexGen Technologies, Namakkal Dist. Tamilnadu-India, 5-6 January 2018, pp. 679-681.
  • [3] T. Taye, “Hydraulic Ram Pump”, Journal of the ESME, vol. 2, Addis Ababa, Ethiopia, Juli 1998.
  • [4] S.S. Mondol. 2017, “Design, manufacture and test a hydraulic ram”, Research Gate Article, May 2017. https://www.researchgate.net/ publication/317031378.
  • [5] M. Inthachot, S. Saehaeng, J.F.J. Max, J. Müllerc, and W. Spreer, “Hydraulic ram pumps for irrigation in Northern Thailand”, Elsevier B.V: in Agriculture and Agricultural Science Procedia, vol. 5, 2015, pp. 107-114.
  • [6] M. Suarda, and I G.K. Sukadana, “Penerapan Teknologi Pompa Hydram Untuk Meningkatkan Produktivitas Usaha Tani Sari Murni Banjar Kebon Jero”, Report of ‘Iptek bagi Masyarakat (IbM)’, 2010.
  • [7] A.A. Tessema, “Hydraulic Ram Pump System Design and Application”, ESME 5th Conference on Manufacturing and Process Industry, Addis Ababa, Ethiopia, September 2000.
  • [8] W. Sobieski, D. Grygo, and S. Lipinski, “Measurement and analysis of the water hammer in ram pump”, Indian Academy of Science: Sadhana, vol. 41, no. 11, 2016, pp. 1333-1347.
  • [9] R.N. Mbiu, S.M. Maranga, and M. Mwai, “Performance testing of hydraulic ram pump”, Proceedings of the Sustainable Research and Innovation (SRI) Conference, 6 - 8 May 2015, pp. 6-8.
  • [10] M.N. Harith, R.A. Bakar, D. Ramasamy, and M. Quanjin, “A significant effect on flow analysis & simulation study of improve design hydraulic pump”, 4th International Conference on Mechanical Engineering Research (ICMER2017), IOP Conf. Series: Materials Science and Engineering, vol. 257, no. 012076, 2017.
  • [11] M.N. Harith, R.A. Bakar, D. Ramasamy, K. Kardigama, and M. Quanjin, “A study of waste and delivery valve design modification to the pump performance”, iCITES 2018, IOP Conf. Series: Materials Science and Engineering, vol. 342, no. 012090, 2018.
  • [12] A. Rajaonison, and H.T. Rakotondramiarana, “Theoretical study of the behavior of a hydraulic ram pump with springs system”, American Journal of Fluid Dynamics, vol. 9, no. 1, pp. 1-12.
  • [13] S.S. Sampath, S. Shetty, A.M. Pendanathu, W. Javaid, and M.C.P. Selvan, “Estimation of power and efficiency of hydraulic ram pump with re-circulation system”, International Journal of Computer-aided Mechanical Design and Implementation, vol. 1, no. 1, 2015, pp. 7-18.
  • [14] H.T. Dhaiban, “Experimental study the performance of ram water pump”, Energy Science, Reports on research projects, EUREKA: Physics and Engineering, no. 1, 2019, pp. 22-27.
  • [15] X. Guo, J. Li, K. Yang, H. Fu, T. Wang, Y. Guo, Q. Xia, and W. Huang, “Optimal design and performance analysis of hydraulic ram pump system”, Proceeding of Institution of Mechanical Engineering 2018, Part A. J. Power and Energy, pp. 1-15.
  • [16] N. Mishra, E.I.B. Bhagat, and Y.K. Jyoti, “Effect of water hammering action on performance of hydraulic ram pump”, International Journal of Scientific and Research Publications, vol. 8, no. 12, December 2018, pp. 396-399.
  • [17] F.S. Januddi, M.M. Huzni, M.S. Effendy, A. Bakri, Z. Mohammad, and Z. Ismail, “Development and testing of hydraulic ram pump (hydram): experiments and simulations”, The Internacalvertional Fundamentum Sciences Symposium 2018. IOP Conf. Series: Materials Science and Engineering, vol. 440, no. 012032, 2018, pp. 1-9.
  • [18] G. Viccione, N. Immediata, R. Cava, and M. Piantedosi, “A preliminary laboratory investigation of a hydraulic ram pump”, MDPI Proceeding. The 3rd EWaS International Conference on “Insights on the Water-Energy-Food Nexus”, Lefkada Island, Greece, 27–30 June 2018, pp. 1-7.
  • [19] V.L. Streeter, and E.B. Wylie, Fluid Mechanics, 6th edition, New York: McGraw-Hill Book Company, 1975.
  • [20] R.K. Rajput, A Textbook of Fluid Mechanics and Hidroulic Machines, S1 Version, New Delhi: S. Chad and Company Ltd, 2002.
  • [21] J.P. David, and H.W. Edward, Schaum’s Outline of Theory and Problems of Fluid Mechanics and Hydraulics, Singapore: McGraw-Hill Book Company, 1985.
  • [22] B. Young, “Design of Homologous Ram Pump”, Journal of Fluids Engineering, Transaction of the ASME, vol. 119, June 1997, pp.360-365.
  • [23] M. Chi, and P. Diemer, Hydraulic Ram Handbook, Bremen: Bremen Overseas Research and Development Association, 2002.

PDF:

https://jurnal.harianregional.com/ijeet/full-58165

Published

2020-08-03

How To Cite

SUARDA, Made et al. Preliminary Study on Various Shaped Models of Delivery valve in Hydraulic Ram Pump – Experimental Results.International Journal of Engineering and Emerging Technology, [S.l.], v. 5, n. 1, p. 43-49, aug. 2020. ISSN 2579-5988. Available at: https://jurnal.harianregional.com/ijeet/id-58165. Date accessed: 08 Jul. 2024. doi:https://doi.org/10.24843/IJEET.2020.v05.i01.p09.

Citation Format

ABNT, APA, BibTeX, CBE, EndNote - EndNote format (Macintosh & Windows), MLA, ProCite - RIS format (Macintosh & Windows), RefWorks, Reference Manager - RIS format (Windows only), Turabian

Issue

Vol 5 No 1 (2020): January - June

Section

Articles

Creative Commons License This work is licensed under a Creative Commons Attribution 4.0 International License